Factory Direct Sale Heavy Duty Push Back Rack Durable Anti-Rust Warehouse Racking

• Customization: Available
• After-sales Service: Support
• Warranty: 5 Years Warranty
• Model NO.: HLD
• Usage: Tool Rack, Industrial, Warehouse Rack
• Material: Steel
• Structure: Layer Frame
• Type: Push Back Rack
• Mobility: Adjustable
• Height: 5-15m
• Weight: 500kg-3000kg
• Closed: Open
• Development: Conventional
• Serviceability: Common Use
• Surface Treatment: Powder Coated
• OEM: Available
• Certificate: ISO9001/CE
• Operation: by Forklift
• Transport Package: Standard
• Specification: ISO 9001/CE
• Trademark: HLD
• Origin: China
• HS Code: 7308900000
• Production Capacity: 2000 Tons / Month
• Package Size: 680.00cm * 100.00cm * 230.00cm
• Package Gross Weight: 1000.000kg

Product Description

Product Description

Push Back Rack

Push-back pallet rack is for high density storage. The depth is usually within 5 pallet positions. The rack takes "first-in-last-out (FILO)" access mode. 

Characteristics
-Applicable to warehouses with high cost per unit area, such as cold storage, warehouses in prime locations in downtown, etc.
-Provide 20%-30% selectability
-Both safety and operating efficiency are higher than drive-in racks (drive through racks).
-Compared with adjustable pallet rack, it increases the utilization rate of the ground by about 60%.
-It can be used with a reach forklift or a counterbalanced forklift, and the forklift operation requirements are lower than drive-in pallet rack.

Components
The main components are upright frames, beam, support rail, and carrying cart. The rack is bolted structure and easy to dismantle
and install to a new place.

Middle Cart

Small Cart or 1st Cart

Protect Rail

Made of square tube. To save cost, the structure could be as simple as in above picture. Each has 8 bearing. Design could be different as clients' needs.

Made of angle steel, square tube. To save cost, the structure could be as simple as in above picture. Each has 8 bearings. Design
could be different as clients' needs.

Made of C-shape or U-shape steel. When ground level need no carts and pallet placed directly on ground. Protect rail is recommend.

Product Information

Selection	Single row, back to back rows, double deep rows, and multiple rows
Rack Size	Standard pallet:1200*800(F)/1200*1000(F)/1100*1100(F)/1066(F)*1220 Depth: 1000MM/900MM/1020MM Width: 2700MM/2300MM/2500MM/2432MM Height: pitch is adjusted by increments of 50mm, 50.8mm or 75mm Customized Pallet: other special size( you can contact us directly)
Beam Range	Box beam: 80*50mm, 100*50mm, 110*50mm, 120*50mm, 140*50mm, 160*50mm, 180*50mm; 80*40mm, 100*40mm, 120*40mm, 140*40mm Step beam: 50*30mm, 60*40mm, 80*50mm, 110*50mm Teardrop type step beam: 3", 3.5", 4", 4.5", 5", 5.5", 6"
Upright range	Dexion type: 80*60mm; 90*60mm; 90*70mm; 100*70mm; 120*95mm, Thickness: 1.5~3.0mm Teardrop type: 3"*3" (76.2*76.2mm), 90*70mm, 100*70mm, 120*95mm
Color	Standard: RAL5005, 5015, 5017, 6000 for upright frame RAL2004, 2002 for beam RAL1003, 1023 for upright protector & frame barrier Can also customized, any color is OK.
Pitch holes	50mm, 2" (50.8mm) or 75mm
Finish	Powder Coated
Usage	Warehouse Storage System
Application	Widely Used
Packing	Packed by poly sheets and straps and pallets; Other parts and accessaries are packed by cartons; straps; wooden pallets, ect.
Free Sample	Available (Delivery Cost on Buyer)
OEM	Available

Store & Withdraw
Loading

Carrying cart runs along the inclined support rail. 1st pallet is placed on the carrying cart, 2nd pallet pushed back 1st pallet
into the rack, 3rd pallet push the front 2 pallets into rack, the rest keep the same operation.
Unloading
Pallet at the pick-up end is carried out first, the next pallet slides to the pick-up point by gravity for unloading, other keep
the same.
Unlike drive in pallet rack, forklift truck don't drive into the rack

Successful Case

Company Profile

HLD Racking

Guangdong Henglida Intelligent Logistics Equipment Co., Ltd. Was established in 2001 and is headquartered in Guangdong. It is an integrated equipment enterprise specializing in the research, design, production, and installation of warehouse logistics equipment. With over 20 years of industry accumulation, the company has developed strong capabilities in the field of warehouse logistics equipment.

FAQ

Are you manufacture or trading company?

Where is your factory? Can I visit ?

What is your delivery time?

We are manufacture. Our factory has been specializing in warehouse racks and different,kinds of display stands since 2001.

Our factory is located in Jiangmen, Guangdong. You are warmly welcome to visit whenever you are available.

In general, within 15 days. It also depends on the order quantity and shelving design.

What is the term of payment?

Are samples available?

How could Iinstall the racks?

Payment terms: 30% of deposit upon signing the PI, and balance will be cleared by T/T before delivery.

A:Yes, samples are available at any time. We charge some sample cost and will return it during the next order.

We provide detailed install instruction for every type of shelf. If needed,we can also ask engineers to teach you for free.

Could you produce according to customers' design?

Do you produce shelf with different kinds of materials?

What are main rack and add on rack?

Sure, we have very rich experience in customizing shelves.

Yes,our products are mainly made of metal but we also produce accessory shelves or displays with wood,titanium
alloy,acrylic,glass,etc.wall recessed jewelry cabinet

The difference between these two kinds of racks is upright. Main rack is the start rack with 2 uprights and add on rack is the
continue rack with only 1 upright. For example, if there are 15 wall racks against the wall, the structure will be 1 main rack 14
add on racks.